FixPlainly

Whirlpool dishwasher error codes

Whirlpool dishwashers. Models with a display show an F#E# code. Models without one flash the Clean light: count the first group of flashes for the F number, then the second group for the E number. Seven flashes, a pause, then one flash means F7 E1.

11 code meaningsLast checked against its sources on

Water supply and filling

H2O: No water detected

The dishwasher can’t detect water coming in.

Also shown as H20
You can usually fix thisFix steps

F8 E2: Fill valve electrical fault

The valve that lets water in has an electrical problem.

Also shown as F8E2
Fixable with careFix steps

Draining and overfilling

F9 E1: Long drain (not draining)

The dishwasher took too long to drain.

Also shown as F9E1
Fixable with careFix steps

Leaks

F8 E4: Water in the drip tray

The float switch has found water in the tray underneath the dishwasher.

Also shown as F8E4
Fixable with careFix steps

F8 E5: Fill valve stuck open

Water may keep running into the dishwasher. Act quickly to stop the water.

Also shown as F8E5
Usually needs a technicianFix steps

Power and controls

F2 E1: Stuck key or console fault

Power cycle for 30 seconds. Schedule service if the code returns.

Also shown as F2E1
Usually needs a technician

Parts and sensors

F7 E2: Wash motor fault

Power cycle for 30 seconds. Schedule service if the code returns.

Also shown as F7E2
Usually needs a technician

F4 E2: Heating system fault

Power cycle for 30 seconds. Schedule service if the code returns.

Also shown as F4E2
Usually needs a technician

F6 E1: Main control user interface fault

Power cycle for 30 seconds. Schedule service if the code returns.

Also shown as F6E1
Usually needs a technician

F1 E1: Control module fault

Power cycle for 30 seconds. Schedule service if the code returns.

Also shown as F1E1
Usually needs a technician

F1 E2: Main control communication fault

Power cycle for 30 seconds. Schedule service if the code returns.

Also shown as F1E2
Usually needs a technician

Resetting a Whirlpool dishwasher

Whirlpool’s power cycle: disconnect the dishwasher for 30 seconds. Unplug it if it plugs in; if it’s hardwired, switch off its breaker at the electrical panel. Then restore power.

Sources

  1. Dishwasher Error Codes: Reading, Whirlpool Product Help
  2. Dishwasher Not Draining, Whirlpool Product Help
  3. F8E5: Dishwasher, Whirlpool Product Help
  4. F8E2: Dishwasher, Whirlpool Product Help
  5. F4E2: Dishwasher, Whirlpool Product Help
  6. F1E1: Dishwasher, Whirlpool Product Help
  7. F1E2: Dishwasher, Whirlpool Product Help
  8. F2E1: Dishwasher, Whirlpool Product Help
Last checked against its sources on