Whirlpool dishwasher code F8 E2: fill valve electrical fault

What it means

The valve that lets water in has an electrical problem.

What to try

Unplug the dishwasher before any step beyond a quick look, and turn the water off before touching hoses.

1. Remove the drip tray and check the inlet valve connection for leaks.
2. Power cycle the dishwasher for 30 seconds.

Call a technician if

Resetting a Whirlpool dishwasher

Whirlpool’s power cycle: disconnect the dishwasher for 30 seconds. Unplug it if it plugs in; if it’s hardwired, switch off its breaker at the electrical panel. Then restore power.

Sources